Anti-MEK3 antibody [EPR17345-104] - BSA and Azide free (ab231166)
Key features and details
- Produced recombinantly (animal-free) for high batch-to-batch consistency and long term security of supply
- Rabbit monoclonal [EPR17345-104] to MEK3 - BSA and Azide free
- Suitable for: WB, IHC-P, ICC/IF, IP, Flow Cyt
- Knockout validated
- Reacts with: Mouse, Rat, Human
Overview
-
Product name
Anti-MEK3 antibody [EPR17345-104] - BSA and Azide free
See all MEK3 primary antibodies -
Description
Rabbit monoclonal [EPR17345-104] to MEK3 - BSA and Azide free -
Host species
Rabbit -
Tested Applications & Species
See all applications and species dataApplication Species Flow Cyt MouseICC/IF MouseIHC-P MouseIP HumanWB Human -
Immunogen
Recombinant fragment. This information is proprietary to Abcam and/or its suppliers.
-
Positive control
- WB: HepG2, HeLa and MCF7 whole cell lysates; Human skeletal muscle, mouse spleen and rat spleen lysates. IHC-P: Human skeletal muscle, Human lung adenocarcinoma, mouse skeletal muscle and rat skeletal muscle tissues. ICC/IF: NIH/3T3 cells. IP: HeLa whole cell extract.
-
General notes
Ab231166 is the carrier-free version of ab195037. This format is designed for use in antibody labeling, including fluorochromes, metal isotopes, oligonucleotides, enzymes.
Our carrier-free formats are supplied in a buffer free of BSA, sodium azide and glycerol for higher conjugation efficiency.
Use our conjugation kits for antibody conjugates that are ready-to-use in as little as 20 minutes with
ab231166 is compatible with the Maxpar® Antibody Labeling Kit from Fluidigm.
Maxpar® is a trademark of Fluidigm Canada Inc.
Properties
-
Form
Liquid -
Storage instructions
Shipped at 4°C. Store at +4°C. Do Not Freeze. -
Storage buffer
pH: 7.2
Constituent: PBS -
Carrier free
Yes -
Concentration information loading...
-
Purity
Protein A purified -
Clonality
Monoclonal -
Clone number
EPR17345-104 -
Isotype
IgG -
Research areas
Images
-
This WB data was generated using the same anti-MEK3 antibody clone, EPR17345-104, in a different buffer formulation (cat# ab195037).
Lane 1: Wild-type HAP1 cell lysate (20 µg)
Lane 2: MEK3 knockout HAP1 cell lysate (20 µg)
Lane 3: HeLa cell lysate (20 µg)
Lane 4: Jurkat cell lysate (20 µg)
Lanes 1 - 4: Merged signal (red and green). Green - ab195037 observed at 40 kDa. Red - loading control, ab8245, observed at 37 kDa.
ab195037 was shown to specifically react with MEK3 when MEK3 knockout samples were used. Wild-type and MEK3 knockout samples were subjected to SDS-PAGE. ab195037 and ab8245 (loading control to GAPDH) were both diluted to 1/5000 and 1/10000 respectively and incubated overnight at 4°C. Blots were developed with Goat anti-Rabbit IgG H&L (IRDye® 800CW) preadsorbed (ab216773) and Goat anti-Mouse IgG H&L (IRDye® 680RD) preadsorbed (ab216776) secondary antibodies at 1/10000 dilution for 1 hour at room temperature before imaging. -
Flow Cytometry analysis of NIH/3T3 (mouse embryo) labelling MEK3 with purified ab195037 at 1/1000 (red). Cells were fixed with 4% paraformaldehyde and permeabilised with 90% methanol. Alexa Fluor® 488 goat anti-rabbit IgG (1/2000) was used as the secondary antibody. Black - Isotype control, rabbit monoclonal IgG. Blue - Unlabelled control, cells without incubation with primary and secondary antibodies.
This data was developed using the same antibody clone in a different buffer formulation containing PBS, BSA, glycerol, and sodium azide (ab195037).
-
Immunohistochemical analysis of paraffin-embedded Rat skeletal muscle tissue labeling MEK3 with ab195037 at 1/500 dilution followed by Goat Anti-Rabbit IgG H&L (HRP) (ab97051) secondary at 1/500 dilution. Cytoplasmic and nuclear staining on rat skeletal muscle is observed. Counter stained with Hematoxylin.
Negative control: Using PBS instead of primary antibody, secondary antibody is Goat Anti-Rabbit IgG H&L (HRP) (ab97051) at 1/500 dilution.
This data was developed using the same antibody clone in a different buffer formulation containing PBS, BSA, glycerol, and sodium azide (ab195037).
Heat mediated antigen retrieval was performed with Tris/EDTA buffer pH 9.0 before commencing with IHC staining protocol.
-
Immunohistochemical analysis of paraffin-embedded Mouse skeletal muscle tissue labeling MEK3 with ab195037 at 1/500 dilution followed by Goat Anti-Rabbit IgG H&L (HRP) (ab97051) secondary at 1/500 dilution. Cytoplasmic and nuclear staining on mouse skeletal muscle is observed. Counter stained with Hematoxylin.
Negative control: Using PBS instead of primary antibody, secondary antibody is Goat Anti-Rabbit IgG H&L (HRP) (ab97051) at 1/500 dilution.
This data was developed using the same antibody clone in a different buffer formulation containing PBS, BSA, glycerol, and sodium azide (ab195037).
Heat mediated antigen retrieval was performed with Tris/EDTA buffer pH 9.0 before commencing with IHC staining protocol.
-
Immunohistochemical analysis of paraffin-embedded Human skeletal muscle tissue labeling MEK3 with ab195037 at 1/500 dilution followed by Goat Anti-Rabbit IgG H&L (HRP) (ab97051) secondary at 1/500 dilution. Cytoplasmic and nucleus staining on Human skeletal muscle is observed. Counter stained with Hematoxylin.
Negative control: Using PBS instead of primary antibody, secondary antibody is Goat Anti-Rabbit IgG H&L (HRP) (ab97051) at 1/500 dilution.
1:Ben-Levy R,et.al.(1998) Nuclear export of the stress-activated protein kinase p38 mediated by its substrate MAPKAP kinase-2. Curr Biol, 8(19):1049-1057.
This data was developed using the same antibody clone in a different buffer formulation containing PBS, BSA, glycerol, and sodium azide (ab195037).
Heat mediated antigen retrieval was performed with Tris/EDTA buffer pH 9.0 before commencing with IHC staining protocol.
-
MEK3 was immunoprecipitated from 1mg of HeLa (Human epithelial cells from cervix adenocarcinoma) whole cell extract with ab195037 at 1/90 dilution. Western blot was performed from the immunoprecipitate using ab195037 at 1/1000 dilution. Anti-Rabbit IgG (HRP), specific to the non-reduced form of IgG, was used as secondary antibody at 1/1500 dilution. Lane 1: HeLa whole cell extract. Lane 2: PBS instead of HeLa whole cell extract.
Blocking and dilution buffer and concentration: 5% NFDM/TBST.
Based on the sequence analysis, ab195037 recognizes 3 isoforms of MEK3 ranging from 36kDa to 40KDa. The multi-bands should be MEK3 isoforms.
This data was developed using the same antibody clone in a different buffer formulation containing PBS, BSA, glycerol, and sodium azide (ab195037).
-
Immunofluorescent analysis of 4% paraformaldehyde-fixed, 0.1% Triton X-100 permeabilized NIH/3T3 (Mouse embyro fibroblast cells) cells labeling MEK3 with ab195037 at 1/250 dilution, followed by Goat anti-rabbit IgG (Alexa Fluor® 488) (ab150077) secondary antibody at 1/500 dilution (green). Confocal image showing both nuclear and cytoplasmic staining on NIH/3T3 cell line. The nuclear counter stain is DAPI (blue). Tubulin is detected with ab7291 (anti-Tubulin mouse mAb) at 1/1000 dilution and ab150120 (AlexaFluor®594 Goat anti-Mouse secondary) at 1/500 dilution (red).
The negative controls are as follows:
-ve control 1: ab195037 at 1/250 dilution followed by ab150120 (AlexaFluor®594 Goat anti-Mouse secondary) at 1/500 dilution.
-ve control 2: ab7291 (anti-Tubulin mouse mAb) at 1/1000 dilution followed by ab150077 (Alexa Fluor®488 Goat Anti-Rabbit IgG H&L) at 1/500 dilution.This data was developed using the same antibody clone in a different buffer formulation containing PBS, BSA, glycerol, and sodium azide (ab195037).
-
This IHC data was generated using the same anti-MEK3 antibody clone, EPR17345-104, in a different buffer formulation (cat# ab195037).
Immunohistochemical analysis of paraffin-embedded Human lung adenocarcinoma tissue labeling MEK3 with ab195037 at 1/500 dilution followed by Goat Anti-Rabbit IgG H&L (HRP) (ab97051) secondary at 1/500 dilution. Cytoplasmic and nuclear staining on cancer cells of Human lung adenocarcinoma is observed. Counter stained with Hematoxylin.
Negative control: Using PBS instead of primary antibody, secondary antibody is Goat Anti-Rabbit IgG H&L (HRP) (ab97051) at 1/500 dilution.
Heat mediated antigen retrieval was performed with Tris/EDTA buffer pH 9.0 before commencing with IHC staining protocol.
-